Posted on No Comments on Filing For Bankruptcy and Your Choices

Filing For Bankruptcy and Your Choices

Bankruptcy lawyer el paso
Bankruptcy lawyer el paso

Deciding to file for bankruptcy is never an easy choice to make. You must first weigh the cons and pros, and determine what type of bankruptcy you can file.

In the city of El Paso, Texas, there are many choices to choose from for your case. Not just any bankruptcy lawyer in El Paso, Texas, will suffice when it comes to your particular situation. When it comes to choosing an attorney to represent you in your bankruptcy case you want to ask some important questions to aid you in your decision. The cost of hiring a lawyer should be one of the last things to consider. Focus on experience and success rate, as this will benefit you in the long run.

The two main choices you have in filing for bankruptcy is not an easy path, however, you must know the difference and which one to pursue. The first option, or Chapter 7, which is not the most recommended, is to file for bankruptcy on your own. The second choice is to file Chapter 13 which goes in to more options and details, so hiring a good attorney is almost vital. You can view the video below for more information on bankruptcy attorneys.

When considering both of these options you may be overwhelmed by what is best for you and your situation. One of the best options is to seek the help of a professional El Paso attorney that is well experienced in handling bankruptcy cases and can assist you in determining which option is best suited for you.

Important Questions To Ask

A major factor in determining which bankruptcy attorney to hire is how long they have been practicing and their level of expertise in the subject matter at hand. You can ask the lawyer personally or do some personal research online, to get more information about them. Although cost of hiring an attorney should be your last thing to take in to consideration, it is still important if you are on a budget. Ask yourself some questions.

  • Does the attorney seem like he knows what they are talking about?
  • Are you getting the attention necessary from his staff?
  • If possible, find out what the relationship has been between past and current clients of theirs. Although client-attorney privilege can prohibit them from sharing that.

Asking the right type of questions can help in determining the best choice for your bankruptcy case. You can get more information on Texas lawyers by visiting the Texas Bar Association website.

Comfort and Confidence

Now that you’re a little more familiar with the two different types of bankruptcy you can file for, it is strictly up to you, with the advice of counsel, to determine which route you will take. Also consider things such as:

  • Asking about payments and fees is also needed for your choice in choosing your bankruptcy attorney.
  • Are you comfortable talking to your lawyer about your reason for filing bankruptcy?
  • Are you confident that the attorney you are about to choose, is the best choice for your bankruptcy case?

Do you feel comfortable speaking to your attorney about all aspects of your bankruptcy decision? Do you personally feel confident that your attorney will be able to perform all his or her duties in your bankruptcy case? This will allow the course of bankruptcy to be less uncomfortable and to proceed much more lithely for a positive experience.

Posted on

Why You Should Secure Your El Paso Garage Door Opener

You’d be right to be concerned about security with your El Paso wireless garage door opener and remote. An intruder can gain access to your garage contents, or even your home if you don’t follow some simple security steps.

Different radio frequencies are used for communication between the garage door remote and the garage door opener. Tiny switches known as dip switches are used to adjust the frequency used between the two. It is a wise idea to reconfigure the dip switch settings to make sure your garage is more secure.

A dip switch is a small block of plastic about the size of a dice cut in half. Most of the time, they’re red or blue and have 8 to 10 small white switch levers in the down or up position. Only when the up or down switch patterns match on both devices will your garage door opener remote control be able to communicate with the opener unit. By adjusting the switch pattern, you are changing the radio frequency used to communicate between the two.

You should be able to easily locate the dip switch on the opener and on the remote control clicker. But to get access to the dip switch on the remote you might need to open it up if the dip switch isn’t found in the battery compartment. Remove the screws holding the remote together, or carefully pry it apart if there are no screws. Once you have access to the dip switch on the remote, scramble the switch positions, and then match the positions on the garage openers dip switch block. It doesn’t matter what the pattern looks like, so long as it’s a random pattern that would be difficult for someone to guess.

If you have trouble getting the remote to work after doing this, verify that the dip switch patterns are the same on both units. Then check the remote battery is in good condition, and as usual, make sure the opener has power and operates normally using the control panel inside your garage. You might have to read the manual if all else fails.

If you are thinking of getting a new garage door opener or have already gotten one, then you will want to change settings, just to make sure everyone is honest. Don’t forget, your installer or anyone working with him knows your frequency switch settings unless you change them. So go ahead and mix up the switch pattern settings and test that it works.

Even if you are a garage door opener installation do-it-yourself type, you’ll want to make the same changes. Don’t just stay with the factory default settings. If you did, then anyone could just drive down your street with a compatible remote until he finds a garage door that opens and gives access to your home. Make sure that’s not you.

This advice also applies to anyone buying or renting a new home too. Just like you might change the lock to guarantee there are no spare keys floating around that could compromise your home security. You have no way of knowing how many previous residences there might have been. And you wouldn’t want someone to just walk right into your garage or home.

Posted on

Best Screen Printing El Paso Company Is Jayva

How to Do Screen Printing On T-shirts

commercial screen printing el pasoScreen printing is a modern and easy way of enhancing the appearance of your t-shirts and other fabrics. This print design makes it possible to transfer some intricate images to the t-shirt and with the advanced technologies available you can have pictures and words in numerous colors and in any design or pattern that you want. Also, the designs that you get on your clothes are also durable, and if you get them from an expert, you can be confident that they will last for the lifetime of the t-shirt.

Who is the best screen printing El Paso company, well Jayva Print House has something to say about that. Unlike other common printing techniques, silk screening or serigraphy will require some experience to get it right. But, here is how to do screen printing on t-shirts.

Transfer Image to the Screen

The first thing is to come up with the image or phrase that you want to have on the t-shirt. You can have anything from a simple word to some colorful and intricate designs, but it is important to know that sophisticated images are more expensive to print. Once you have the design on a piece of paper, the next step is to transfer it to the screen. With modern electronic screen printers it is possible to scan the image, but with the traditional technique, the exposure method is the most reliable.

Test the Print

Even when the job is by a professional, it is not possible to know how an image will look on a t-shirt without doing the actual printing. Because of this fact, it is always important to do some tests by printing the image on sheets of paper. Sometimes it is also necessary to do the test prints on a piece of fabric with the same characteristics as the t-shirt so as to get a clear picture of how the image will look. But, in most cases, this is only so for bulk t-shirt printing projects.

Transfer Image From Screen to T-shirt

Moving the image to the shirt is straightforward, but it depends on what you are using. For this, the essential thing is to ensure the right alignment of the t-shirt so that the image will be in the exact place where the customer wants it. Also, one has to be careful when pulling up the screen so as to make sure that ink does not drip on the fabric. But with an expert, this will never be an issue.

Cure the Print

Curing the print is a major step that will ensure that the image will remain intact even after several washes. A heat tunnel provides the fastest way to do this, and it is what a professional company in El Paso, Texas will use when dealing with many t-shirts. But, it is also possible to cure the image with a hot iron, but this will require some skill and keenness.

Clean-Up the T-shirt

After curing, the t-shirt will need a few minutes to dry after which it will be safe to wash. Modern screen print inks do not require any special washing techniques, and so cleaning is a simple process. However, the t-shirts still need the same care that you would give regular ones.

Personalized t-shirts are an excellent marketing tool for your business, and they are also a good way for an individual to have the image they want and not just settle for what they find in the stores. However, to ensure that the print job that you get is the best, you should always use the services of a professional. And if you are in El Paso, Texas our services are only one phone call away.